mountain bike parts, including forks and chain guides. [more...]

with bigger tires, a wider chainline is required to clear the tire and to allow ... the chainring should line up with the 3rd/4th cog up in the rear. ... [more...]

bolt the mount plate to the flange ring with 3) 6 x 16 fhcs. this is for an alignment check so the fasteners only need to snug. ... [more...]

you may need to cut/file on the flange ring for clearance. the outside surface should be as close to the center of the bike as possible. ... [more...]

gizmo '01 installation. 10. this illustration shows the correct location for the rollers. the smaller roller goes on the top guide at the lower rear. ... [more...]